Gear Pumps
ROC Series
ROC Series

Roper Pumps’ “ROC” Series goes with the flow and performs spotlessly in stainless steel.
ROC Solid Service
Applications
- Chemical processing
- Pharmaceutical industries
- Injection and transfer applications of acids and solvents
- Trademarked design
Features
- Heavy duty stainless steel gear pumps for optimum chemical capability
- Back pull-out design for easy maintenance without disturbing piping
- One-piece "D" style bushings eliminate the need for wearplates and provide positive alignment and gear support
- Capable of operating at nominal speeds
- Good for up to 300 PSI differential pressures
- No integralrelief valve available, external relief recommended
Options
- Various drive arrangements are available. Close-coupled bracket and magnetic drive arrangements are available for the small series.
ROC Series
No. | Pump Model | Theoretical Capacity | Maximum Speed | Maximum Flow at Maximum Speed (0 Discharge Pressure) | Maximum Pressure | Port Connection |
---|---|---|---|---|---|---|
X2.5 | .00025 GPR (.946 CC/REV) | 3600 RPM | 0.9 GPM (.204 M3/HR) | 300 PSI (20 Bar) | 1/2" NPT | |
X5 | .0005 GPR (1.89 CC/REV) | 3600 RPM | 1.8 GPM (.41 M3/HR) | 300 PSI (20 Bar) | 1/2" NPT | |
1 | .001 GPR (3.79 CC/REV) | 3600 RPM | 3.6 GPM (.82 M3/HR) | 300 PSI (20 Bar) | 1/2" NPT | |
2 | .002 GPR (7.57 CC/REV) | 3600 RPM | 7.2 GPM (1.64 M3/HR) | 300 PSI (20 Bar) | 1/2" NPT | |
3 | .003 GPR (11.36 CC/REV) | 3600 RPM | 10.8 GPM (2.45 M3/HR) | 300 PSI (20 Bar) | 3/4" NPT | |
7 | .007 GPR (26.5 CC/REV) | 1800 RPM | 12.6 GPM (2.86 M3/HR) | 300 PSI (20 Bar) | 1-1/2" NPT | |
12 | .012 GPR (45.42 CC/REV) | 1800 RPM | 21.6 GPM (4.91 M3/HR) | 300 PSI (20 Bar) | 1-1/2" NPT | |
16 | .018 GPR (68.14 CC/REV) | 1800 RPM | 32.4 GPM (7.36 M3/HR) | 300 PSI (20 Bar) | 2" NPT |
Materials of Construction
No. | Housing | Gears | Bearings | Shaft | O-rings | |
---|---|---|---|---|---|---|
- | 316SS | 17-4 PH SS | Carbon Graphite | N/A | PTFE | |
- | ASTM A743 | ASTM A564 Type 630 | - | - | - | |
Optional | - | - | Silicon Carbide | - | - |
Key Features
Standard
- Helical gears for quiet operation
- Bi-directional rotation
- Gauge connections on ports
- Back pullout design for easy disassembly without disturbing piping
- Seal flexibility - single, double, and cartridge
- Carbon graphite wearplates eliminate endplate wear
- Cast construction
- Flush/drain ports on seal housing
Optional
- Magnetic drive option for seal-less design